How to open padlocks without a key?

Open locks without a key

It is quite common to face yourself when you want to open a padlock and not find the key. Surely you urgently need to open the padlock, and for this we will give you the best keys to able to open it without a key.

To get to this tutorial, it is because you need a hopeful and immediate solution for something urgent. On many of these occasions we do not even need the hands of a professional and we can do it with a little patience and saving time and money.

Open a padlock with the hammer

There are numerous techniques that we can use to open a lock effectively. we can always use a hammer, but not using brute force, but rather handling skill and precision in a precise way. This technique is very effective for opening numbered or combination padlocks.

It must be clear that we will hit the lock, but without doing it with much force, since it can be broken and will no longer have its functionality. we will hit with small but firm taps. It is necessary to achieve that great vibrations are caused until the lock opens. With this we will get the lock to open or move little by little until it is open.

Open locks without a key

Using a metal clip

A paper clip can be a useful alternative and that can be found in almost all homes. If the clip has a plastic coating, it will have to be removed until you get the metal part.

Extends the clip fully and take the end and bend it about 45 degrees. It has to look like a little key because We are going to introduce it in the part where the key is inserted. We will make smooth movements as if we were going to open it while pressing upwards. It may not be easy to perform this skill the first time, but you will have to be patient and move it until it fits. You will hear small clicks while you turn the metal, when you see that it has finally turned is when you will see that it has opened.

A tool called a pick

This instrument is one of the most used, it is derived in various forms and is one of the most used in locksmiths. The pick is manufactured and created especially to open padlocks without the use of the key. It is a sharp object with a somewhat twisted end so that it can do its job.

Se will introduce the metal through the groove of the cylinder and we will try mobilize the pins, springs and counterpins. Its purpose is to activate this mechanism so that the cylinder can finally rotate. We detail its steps below:

  • We introduce the pick inside the padlock as if it were the key. One has to let the tip point up, is where the teeth of the key point once the cylinder is engaged in the lock.
  • Act quickly. move the pick vertically and horizontally, trying to remove it only halfway and reintroducing it, but without reaching the bottom. You have to try to press in order to aim the teeth of the key.
  • Turn the cylinder with a shim, while the pick movement is being carried out. With a few precise movements and with patience you will observe how the cylinder turns and the lock opens.

Open locks without a key

Stethoscope

This medical instrument has been used to open safes when they are classic models. The idea is of listen to the mechanism of a padlock when numbering or combination. We place the stethoscope and we move the numbers, at the moment we place a number and it makes a typical block and a dry sound, this is where it will be noticed that that number is.

The manufacture of a metal sheet

In this part you have to do with a piece of sheet metal, It has to be something firm like the one on a soda can. We will cut a piece of T-shaped sheet metal with the help of scissors. It must have the corresponding size so that you can insert it through the slot.

  • You have to bend it slightly making a curve and we will introduce it in the part of the slot, making it rotate from one side to the other. You have to try until you see how the lock opens.

Open locks without a key

Use a drill with a fine bit

The drill can be used as an exclusive measure and using force. The idea is of handle it without damaging the padlock, at least, to be able to make it usable next time.

  • We will use a fine bit and we will drill the lock on the right side, where the shackle is kept attached to the padlock. In order to make the perforation better without the bit slipping, we can file the surface a little with a metal file.
  • The idea is drill the space where each pin goes, without actually damaging them and with the idea that they can be extracted with care.
  • When remove the padlock pins It will already be ready to be opened with any key, since the box where they are inserted will be empty. Now it can be opened without difficulty. If you save everything you have extracted, it can be placed again in the future to be used again.

Be the first to comment

Leave a Comment

Your email address will not be published. Required fields are marked with *

*

*

  1. Responsible for the data: Miguel Ángel Gatón
  2. Purpose of the data: Control SPAM, comment management.
  3. Legitimation: Your consent
  4. Communication of the data: The data will not be communicated to third parties except by legal obligation.
  5. Data storage: Database hosted by Occentus Networks (EU)
  6. Rights: At any time you can limit, recover and delete your information.